Xantrex PH1800 User Manual download pdf (Page 33)

Basic Operation

975-0288-01-01 2–9

Changing Charging Settings

Default Setting The PowerHub 1800 is set at the factory to default to the 40 A Charging

Profile. In the event that one of the other profiles are required, follow the

instructions below to change the setting.

Setting the

Selection

To set the selection to the desired profile, stop pressing the Select Button

when the desired profile is displayed. The unit will set the profile shown

in the display, then will return to the default screen within 10 seconds.

Returns to

Default

The charging setting will revert to the 40 A default setting whenever the

ON/OFF Button is pressed or all DC input sources are removed and utility

AC is not available.

Figure 2-5

Input Displays

Press and hold for approximately

3-5 seconds.

The AC LED will start to flash.

Press again within 10 seconds.

Display shows default

charge setting (40A)

The Charge Setting changes

to the 10 A profile.

The Charge Setting changes to the

0 A profile. This profile completely

turns off the charging feature.

Press again within 10 seconds.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 63 64

No comments

Xantrex PH1800 User Manual Page 33